Magnetic Assemblies
Alnico holding assemblies
Ferrite holding assemblies
Magnetic Base
Lifting Magnets
Permanent Magnet Lifter
Magnetic Chuck
Magnetic door-suction

Circular Magnetic Chuck

circular magnetic chuckCircular permanent magnetic chuck

The circular permanent magnetic chuck provides accuracy and stable clamping solutions, it can be used as auxiliary tool for various kinds of plain surface grinder, universal tool and lathe for holding ferromagnetic materials for machining, suitable for surface grinding machines and electrical discharge machines. Because it is not require power source, not heated and is with small distortion and high precision, the application scope is very wide. According to its structure, the circular permanent magnetic chuck can be classified as straight strip fine-pole type, ordinary pole type and radial pole type. The solid top and bottom plates assure retained accuracy. Full loading power is consistent over the whole plate. Positive hand release. Poles are arranged to hold small, medium and large pieces.

Model D H C1 C2 Z M P
YX-C1 100 40 60 88 4 M6 7
YX-C2 125 62 80 114 4 M6 9
YX-C3 150 62 50 130 4 M8 9
YX-C4 160 62 100 140 4 M8 12
YX-C5 200 67 160 186 3 M10 17
YX-C6 250 75 200 224 4 M10 14
YX-C7 320 80 265 290 3 M12 14
YX-C8 400 92 300 378 6 M12 14
YX-C9 150 50 50 130 4 M8 5
YX-C10 160 50 100 140 4 M8 5
YX-C11 200 64 160 184 3 M10 5
YX-C12 250 68 200 224 4 M10 5
YX-C13 320 68 265 290 6 M12 5
YX-C14 400 68 300 278 6 M12 5
YX-C15 200 45 100 186 4 M6 radial pole

permanent magnetic chuckPermanent Magnetic Super Chuck

Permanent Magnetic Super Chuck is made of high-energy rare earth material (Nd-Fe-B). The magnetic force is permanent, which is suitable for the demand of security and environment protection. There is no risk in the condition of no electrical source and no distortion brought by the heat. It will save the fifty percent of the time for clamping the workpiece when it is used on the machine center. The modular design enables multiple combinations to meet the requirement of workpieces of different size.

Permanent magnetic super chuck is with specific structure. A even polar density and vertical poles comprises a interlaced force for the workpiece, even and same. When the workpiece possesses the clamping force which is generated by 400 cm2 permanent magnetic chuck, it will can be machined with super grinding force, so multiple combinations will prepare for the large workpieces. The chuck is suited to clamping workpieces on the maching center or grinding machine, improving the precision and efficiency. Particularly ideal for the thin workpieces.

Type Dimension (mm) Total Clamping (KN) Pole No. Weight (kg) Handle Size
A B H M N W G K
SC2040S 200 400 100 89 75 > 34 136 47 300 60 14
SC2525 250 250 100 138 75 > 17.5 90 37 300 60 14
YXSC 3030A 300 300 90 160 100 > 25.6 132 55 470 150 17
YXSC 3535A 350 350 90 175 125 > 35 182 73 470 150 17
YXSC 4040A 400 400 90 210 130 > 46.6 240 94 470 150 17
YXSC 4050 400 500 110 210 130 > 58.2 300 110 550 70 17
YXSC 4080A 400 800 90     > 93 480 200 470 150 17
YXSC 40100 400 1000 110 600 215 > 116.4 600 215 550 70 17
Back
 
 
© Since 2004 Yuxiang Magnetic Material Ind. Co.,Ltd. All Rights Reserved
Add: Floor 16, Jinyuan plaza, # 57 South Hubin Road, Xiamen, CHINA 361004
Tel: (86)592 2295387 (86)592 2217138 Fax: (86)592 2207122
Email Address: magnetcom@gmail.com or mag@e-magnet.cn

About Us   Services   Products   Order Tracking   SiteMap  E-Mail  

Magnets Products Suppliers